Bentley OpenRoads Designer CONNECT Edition Update 4 v10.04.00.48 x64 R2 2018

Bentley OpenRoads Designer CONNECT Edition Update 4 v10.04.00.48 x64 R2 2018
x64 | Language:English | File Size: 2.58 GB

Designer Openroads , called software engineering and is specialized in road construction. Software before you as one of the most powerful software in the field is known. With this software, users will be able to plan their advanced conceptual design.

Using software OpenRoads Designer you can always upgrade your work surface. It's your job to entrust to be able to do good finish. Bentley software companies all have their own stone. With this software you will be able to in fact very advanced conceptual design to finish.

Features and OpenRoads Designer:
-One of the most powerful software in the design and construction of roads
-Ability to create conceptual designs and sophisticated you
-Benefit from the advanced geotechnical instruments
-No need of external tools
-Design made in this application are very similar to reality
-Promote your work in all directions available

System Requirements:
-Windows 10 (x64)
-Windows 8/8.1 (x64)
-Windows 7 SP1 (x64)

Recommended Hardware:
-Processor: Intel® or AMD® processor 1.0 GHz or greater. OpenRoads Designer is not supported on a CPU that does not support SSE2.
-Memory:8 GB minimum 16 GB recommended. More memory almost always improves performance, particularly when working with larger models.
-Disk space:9 GB free disk space (which includes the 5.6 GB install footprint for a complete installation)
Video:1600 x 1200 or higher

What is New Bentley OpenRoads Designer CONNECT Edition Update 4:

General Enhancements:

-Update of Power Platform to Update 10 CONNECT Edition (V10.10.00.23). The corresponding MicroStation version is (V10.010.00.23).
-Includes Bentley LumenRT Designer CONNECT Edition Update 10.
-Includes Bentley Descartes CONNECT Edition Update 2 (V10.08.00.22).
-Update of gINT Civil Tools CONNECT Edition Update 1 (V10.01.01.06).
-Support for following ProjectWise Connect Edition (V10.00.03.49) & (V10.00.03.14X).

Survey Enhancements:

-Added utility to merge field books.
-Ability to create a linear chain by keying in a point list to create a survey chain (Example, AC100-AC109, AC100-AC101,AC104-AC106, etcetera.)
-Ability to display survey decorators into individual quadrants, mimicking behavior in (SELECTseries 4).
-Ability to place Survey Point as a cell on the level of element template called by the Feature Definition when the cell was defined with elements on "Default" level. This mimics MicroStation behavior and allows one cell definition to be used when survey points need to be on different levels.
-Added a Close RECT command.

Terrain Enhancements:

-Sight Visibility tool is enhanced to use the alignment's speed table to calculate the instantaneous speed at a given station.
-Sight Visibility tool now allows analysis to be done via equations.
-Aquaplaning tool now previews flowlines and allows the acceptance of the results.
-Aquaplaning now allows the ability to select a manual trace slope graphic.

Geometry Enhancements:

-All Geometry Points are given a name and now include a description field.
-Geometry elements snapped to geometry points now show the point name under element information.
-Horizontal and Vertical Table Editors have been move from Tech Preview to Commercial Release.

Modeling Enhancements:

-Template components now support arcs and circular components.
-Target Aliasing that target Linear XY, Z, a XYZ target types now allows you to load all targets in the DGN without adding them as a Corridor Reference. The tool initially loads Corridor References by default.
-Improved performance on initializing corridor and linear template processing.
-Additional Volume Options: Unsuitable, Cut, Fill, and Substrata has been added.
-The Create Cut Fill Volumes tool now takes account of the volume option in the Feature Definition. This also allows the Cut and Fill tool to take account of Unsuitable Materials and automate the population of the Cut and Fill features definitions.
-Create Cut Fill Volumes has been enhanced to run off featurized meshes. This will allow creation of cut and fill from the 3D model. It is no longer required to create a terrain model for the proposed rough grade.
-End Area Volume report based off the 3D model and cross section name boundary group can now be generated.
-Mass haul report can be generated using the MasshaulTOTIW.xml with End Area Volume report tool.
-Imported Superelevation Rate Tables can now be viewed and edited in the Create/Edit Superelevation Rule File tool.
-Added Display Template tool.
-Ability to Import Template from graphics that contain arcs.

Drawing Production and Annotation Enhancements:

-Ability to place Coordinate Grids on Plan Drawing Models and Sheets.
-Profile Framed Annotations for Curvature now allows use of the amplitude of the curve based off a ration of the Row Height and the curve.
-Frame Annotation allows ticks instead of Vertical lines within a Frame Row.
-Ability to turn off station equation name from annotated alignment and labels.
-Ability to place labels view independent is added.

Tech Preview:

-Asset Manager (Tech Preview).
-Text Favorite Manager (Tech Preview).
-Export to MAXML (Tech Preview).


Download From UploadGig

Download From Rapidgator

шаблоны для dle 11.2